What product content does Home Depot require from suppliers?
Home Depot’s content guide asks every supplier for the same core set: a product name that follows the category’s naming formula, a primary image of the product alone on a plain white background at 1,000 × 1,000 pixels or larger, at least four bullet points of 75–250 characters, marketing copy of three or more sentences (up to 1,500 characters), every attribute in the category’s data standard, and video, lifestyle images and documents where you have them. That is the floor. The listings that sell go well past it.
The checklist — what Home Depot asks for on every item
Work down the list for each item. The first seven are what Home Depot’s own guide spells out; the last three are what separates a live item from one that sells.
- 1
Product name: follow the category formula
On homedepot.com the name is two fields in IDM: MFG Brand Name plus Product Name. The Product Name has a formula that changes by category, shows on screen once you choose the category, must not include the brand, and is limited to 120 characters. Home Depot’s own example for outdoor seating reads “Charlottetown White Wicker Outdoor Chaise Lounge with Green Bean Cushions” — series, colour, material, type, then the cushion. Get this right first; a name that breaks the formula is a common reason an item is sent back.
- 2
Primary image: the product alone on white, 1,000 × 1,000 or larger
The primary image should show the product only — no props, no other products — on a plain white background (hex #FFFFFF), at a minimum of 1,000 × 1,000 pixels so the zoom works, saved as a .jpg. If the product itself is white, Home Depot accepts a light beige background (#F5F5DC). Some categories have their own rules in the category data standard, so check yours.
- 3
More images: angles, close-ups, and the product in a room
Alternate images show the product from other angles and close-ups of special features. Lifestyle or scene shots show it in use or installed; Home Depot’s guide says these are strongly recommended because items that have them convert better. A 360° spin can be added for any product if you supply the spin shots. Every image is a .jpg.
- 4
Video: .mp4, showing how it is used, assembled or installed
Video is optional but Home Depot recommends it for showing how a product is used, how to install or assemble it, or what its features do. All videos must be .mp4 files and are uploaded through Home Depot’s vendor video portal; linking existing videos to more SKUs goes through a separate request so uploads aren’t duplicated.
- 5
Bullet points: at least four, 75–250 characters each
Home Depot sets a minimum of four bullets and lets you add more if they are relevant; some categories require more, so check the category data standard. Each bullet should be 75–250 characters, direct, and written as a feature plus the benefit it gives the customer — the key points of the marketing copy, not the fluff.
- 6
Marketing copy: three or more sentences, up to 1,500 characters
The description must be at least three complete sentences and no more than 1,500 characters. Home Depot’s guide asks you to speak to the customer rather than at them, state the feature first and then why it matters, put all or part of the product name in the first sentence, include the terms shoppers search for, and avoid exaggeration and unsubstantiated claims.
- 7
Attributes: every field in the category data standard
The attributes are what power search filters and the specifications tab. Home Depot’s IDM asks for core attributes that apply to everything (model number, freight class and similar), category-specific marketing attributes, a valid UPC and GTIN, and packaged dimensions and weights — which Home Depot also uses to plan containers and shipping. Its onboarding deck puts it plainly: Home Depot uses exactly what suppliers provide, so the data must be complete and accurate.
- 8
Documents: assembly guides, use and care, warranty
Use and care manuals, instruction and assembly guides, and warranty information can be attached as PDFs and show under “Info & Guides” on the product page. Home Depot asks you to attach them if you have them. For furniture that arrives in a box, the assembly guide is the document shoppers open before they buy.
- 9
Variations and collections
A product sold in several colours, sizes or finishes can be grouped as one listing (Home Depot calls it a Super SKU) by one to three varying attributes, with everything else identical; upload a colour swatch image for each variation. Items that belong together — a sofa, loveseat and chair — can be linked as a Collection, and add-ons from your own assortment as Accessories.
- 10
Reviews and questions
Home Depot’s SEEDS Program lets selected customers receive pre-release or under-reviewed products in exchange for honest reviews; ask about it for new items with no reviews yet. Vendors can also answer customer questions on the product page, and Home Depot asks for answers within 48 hours.
How many images and videos should a Home Depot product page have?
Home Depot publishes one hard minimum — the primary image — and leaves image counts to each category’s data standard. Its content guide says lifestyle images are strongly recommended because they raise conversion, and recommends video wherever use, assembly or installation isn’t obvious from a photo.
Our rule for furniture and home décor is simpler: give the shopper everything they would check in the store. Every side of the piece, close-ups of the material and the hardware, a view with dimensions, the product in a room, a swatch for each colour, and one short video. Then look at the top sellers in your category on homedepot.com — that is the benchmark a shopper compares you against.
Meeting the requirements gets an item live. Completeness makes it sell.
The requirements above are the floor: an item that meets them can be published. Ranking inside a category is another matter. Home Depot’s search and category pages lean on attributes for filtering and on images, video and reviews for conversion, so an item with the minimum fields sits below items with every recommended field filled.
We score each item two ways: Web Ready (every field required to be published) and Web Complete (every recommended attribute, image set, video and document). Most catalogs we audit are mostly Web Ready and rarely Web Complete — and that gap is where the sales are.
Where the rules live
The category-specific rules are in the Data Standards inside IDM — open any item in Enrich and look for the Onboarding Data Standards tab — and in Home Depot’s Perfect SKU / Content Enrichment guide, both linked under Sources below. They change without much notice, so re-read the standard for your category before a big batch of new items.
What we see across supplier catalogs
The same gaps show up in almost every Home Depot catalog we audit: primary images with props or a watermark, bullets that are a few words long, marketing copy that is a single sentence, furniture that needs assembly with no assembly guide attached, and colour variations set up as separate items with no swatches. None of it is hard to fix. The work is doing it across hundreds of items and keeping it current as the category standard changes.
That is why we bring every item we manage to Web Complete before it goes live and re-check it against the current data standard — and why the free retailer scorecard shows you, item by item, which fields, images and documents are missing.
Frequently asked questions
What size and background does Home Depot require for product images?
The primary image must be the product alone on a plain white background (#FFFFFF), at least 1,000 × 1,000 pixels, as a .jpg. A white product may use a light beige background (#F5F5DC). Alternate, lifestyle and detail images follow the same file rules, and some categories have exceptions in their data standard.
Does Home Depot require video on product pages?
No — video is optional. Home Depot recommends it for showing how a product is used, assembled or installed, and it must be an .mp4 file. In our experience it helps most on furniture and larger items where fit and assembly are the questions shoppers have before buying.
How long can a Home Depot product name be?
The Product Name field in IDM is limited to 120 characters, must follow the naming formula for the item’s category, and must not include the brand name — the brand sits in its own field and Home Depot combines the two on the page.
How many bullet points does Home Depot require?
At least four, each 75–250 characters, written as a feature and its benefit. You can add more if they are relevant, and some categories require more — the category data standard is the final word.
Where do I find Home Depot’s data standard for my category?
Inside IDM: open an item in Enrich and use the Onboarding Data Standards tab, or the Data Standards link on the IDM home page. It lists the required and recommended attributes, the product-name formula and any image exceptions for that category.
Can Grow eCommerce bring my Home Depot content up to this standard?
Yes. We write titles to the category formula, produce or correct images to spec, write bullets and copy, fill every attribute, attach documents and set up variations and collections — inside your own vendor account, so the data stays yours. Start with the free retailer scorecard to see what each item is missing, or see how we manage Home Depot.
See which fields, images and documents each of your items is missing
Our free retailer report checks your Home Depot catalog item by item against this list and shows what is incomplete — free.
Sources
- The Home Depot — Perfect SKU / Content Enrichment Best Practices (PDF): product name, primary image, visual assets, Super SKU, collections, marketing copy, bullets, documents, SEEDS Program, Q&A
- The Home Depot — Onboarding New Items in IDM (April 2021, PDF): Product Name (120), UPC and GTIN, core and marketing attributes, packaged dimensions, Data Standards tab
- The Home Depot Supplier Hub
Retailer rules change often; we re-check these pages on every review.